3 Tips for Cleaning Your Icemaker

It’s easy to take an icemaker for granted. Many of us grow so accustomed to icemakers performing their primary function without incident that we allow cleaning and maintenance to fall by the wayside. However, failing to clean an icemaker on a semi-regular basis can result in sour-tasting, unsanitary ice, as well as a host of other issues. Fortunately, cleaning your icemaker doesn’t have to be difficult or time-consuming. Armed with the following pointers, you’ll be able to make your icemaker sparkle in a timely and stress-free manner.

1. Turn off the Ice Maker

Before kicking off the cleaning process, you’ll need to turn off your icemaker. If you’re unclear on where the device’s on/off switch is, consult your refrigerator’s owner’s manual or visit the manufacturer’s website. Once the icemaker has been shut off, take care to disconnect its water line. Give the device time to finish the batch of ice it was in the middle of making before proceeding any further, then remove the ice bin and replace it with a shallow pan. Lastly, unscrew the drainage cap and allow all the accumulated water to drain out before putting the cap back on.

2. Clean the Bin and Water Pan

Your ice bin can be cleaned with warm water and dish soap. Take care to give it a thorough scrubbing, particularly if it’s been a while since the last cleaning. Additionally, the water pan can be cleaned with an over-the-counter icemaker cleaner or a homemade solution consisting of vinegar, lemon water and dish soap. Once both of these components have been cleaned, take care to thoroughly dry them. Floridians in need of icemaker maintenance should get in touch with the Sub Zero repair service Key Largo.

3. Run a Cleaning Cycle

After you’ve taken care of all the grunt work, you’ll be ready to put the bin back and run a cleaning cycle. This can be accomplished by selecting the “Clean” setting on the device’s control switch. The amount of time this cycle will take varies depending on the icemaker’s manufacturer and model, but you can typically expect to wait about 90 minutes. Additionally, the ice produced during the cleaning cycle should be thrown out.

Many people rarely give a thought to icemaker maintenance. However, this kind of attitude can result in noticeable defects and costly repairs. Luckily, regular cleanings can nip a wide assortment of icemaker issues in the bud. Putting the previously discussed tips into practice is sure to simplify the cleaning process and prove highly beneficial to your icemaker.

Leave a Reply